H505C/H206C READER WRITER ENCODER

Introduction

Magnetic Swipe Card Reader/Writer H2000  is designed to offer a card reading/writing solution for ISO formats. It reads and writes up to 3 tracks of data, decoding/encoding and verifying up to 3 tracks of data simultaneously. H2000 Reader/Writer provides a standard RS-232/USB interface to communicate with host system or other terminal computers.



Features
Reading/Writing magnetic stripe card complied with ISO formats
Read/Write High & Low Coercive (300~4000  OE)
High/Low Coercivity encoding circuitry selectable on screen
Program software for Windows 98/Me/XP
Programming software for various read/write performance
Manual Swipe to read and/or write card with RS-232 /USB output
Writing and verifying data on single, dual, or triple track in one swipe
+24VDC, 2.5A Max external power adapter attached
Dimensions of 210(L) x 60(W) x 62(H) mm

Specification
Electrical
Power requirements +24VDC +/- 5%
Consumption Typical 350mA Max. 600mA plus for each writing track
Power supply External switching power 24V/2.5A
Communication Standard RS232 or RS232 with USB-to-RS232 adapter cable
Ripple 50mVp-p or less
Dielectric strength 500 VDC for 1 minute
Performance
Read card Track1 Track2 Track3
Bit per density 210 bpi 75/210bpi 210 bpi
Coercive force Read/write 300-4000 oe xxxxx
Card thickness 0.76-1.2mm
Read speed STD card Jitter +/-15% Amp. 60%
5-55ips 5-50ips 5-50ips
Write speed 5-30ips
Write jitter Interval < +/- 10%, Sub-interval < +/- 12%
Error rate Read < 0.5%
Write < 0.8%
Head life Min. 1000K swipes for both read/write head
Mechanical
Body material ABS 94V-0
Weight Approx. 1.5kg
Dimension 210.1L x 60W x 62H mm
Swipe Manual, single direction
Environments
Operation -10 to 55oC, 10 to 85% humidity
Storage -30 to 70oC, 10 to 90% humidity
Safety Approval
Rating FCC Class B, CE ClassB, UL, cUL